Table of Contents
Advertisement
How to Ride Your Bike
Fuel Saving Tips :
A well maintained vehicle and good driving can
contribute a lot to the saving of petrol. Following are a
few simple fuel saving tips.
•
Ride smoothly and steadily at an optimum driving
speed to get best mileage.
•
Avoid harsh braking.
•
Change the gear judiciously according to the speed
and load requirement.
•
Don't overload the vehicle above the specified
payload.
•
Use the accelerator judiciously.
•
Cut off the engine if you want to stop for more than
two minutes.
How to check mileage (Fuel efficiency)
Best way to calculate mileage is by following the full
tank to full tank method.
•
Fill way tank full up to small mouth (brim).
•
Run the bike for say 100 km.
•
Fill the tank full again in same fuel filling station,
probably with same fuel dispenser.
•
Divide kilometer run / fuel quantity filled.
Ensure following maintenance points to get
optimum performance from your bike.
Fuel
Check fuel lines & connections
for leakage.
Spark Plugs Inspect and clean spark plugs.
Adjust electrode gap. Replace
spark plugs as per P.M. Chart.
Air Filter
Clean the air filter element
periodically. Replace as per
Periodic Maintenance Chart.
Engine Oil
Check engine oil level. Always
use recommended grade and
quantity.
Brakes
Ensure that the brakes are not
dragging / binding.
Clutch
Ensure correct clutch lever
play.
Tyre Air
Always maintain recommended
Pressure
tyre pressure.
Brake Fluid
Always maintain brake fluid
level above minimum mark
16
Advertisement
Table of Contents
