Mercedes-Benz Black Series Operator's Manual page 257

never lie under the raised vehicle.
R
never start the engine when the vehicle is
R
raised.
never open or close a door or the trunk lid
R
when the vehicle is raised.
make sure that no persons are present in
R
the vehicle when the vehicle is raised.
Using lug wrench :, loosen the bolts on
X
the wheel you wish to change by about one
full turn. Do not unscrew the wheel bolts
completely.
The mounting for the jack is centered
between the front and rear wheel housings
(arrow).
! The jack is designed exclusively for
jacking up the vehicle at the jacking points.
Otherwise, your vehicle could be damaged.
Changing a wheel
Position jack = at jacking point ;.
X
Example
Make sure that the base of the jack is
X
positioned directly under jacking point ;.
Turn crank ? clockwise until jack = sits
X
completely on jacking point ; and the
base of the jack lies evenly on the ground.
Turn crank ? until the tire is raised a
X
maximum of 1.2 inches (3 cm) off the
ground.
Removing a wheel
255
Z