Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the palm-rest
assembly.
2
Replace the screw that secures the fan to the palm-rest assembly.
3
Route the display cable through the routing guides on the fan.
4
Adhere the tape that secures the display cable to the fan.
Post-requisites
1
Replace the
system
2
Replace the
wireless
3
Replace the battery.
4
Replace the
base
computer. After working inside your
board.
card.
cover.
After working inside your
79