Using the Site Trunking Feature
If the zone controller loses communication with any site, that
site reverts to site trunking.
The display shows the currently selected zone/channel
combination and STE TRNK.
Note:
When this occurs, you can communicate only with
other radios within your trunking site.
Locking and Unlocking a Site
This feature allows your radio to lock onto a specific site. This
feature should be used with caution, since it inhibits roaming to
another site in a wide-area system.
Procedure:
1
Use the preprogrammed Site Lock/Unlock button to toggle
the lock state between locked and unlocked.
2
The radio saves the new site lock state and returns to the
Home screen.
48
English
Viewing and Changing a Site
This feature allows you to view the name of the current site or
forces your radio to change to a new one.
Viewing the Current Site
Procedure:
1
Press the preprogrammed Site Displ/Srch button.
2
The display momentarily shows the name of the current
site and its corresponding received signal strength indicator
(RSSI).
Changing the Current Site
Procedure:
1
Press and hold down the preprogrammed Site Displ/Srch
button.
2
A tone sounds and the display shows momentary
SCANNING.
3
When the radio finds a new site, it returns to the Home
screen.