LG DF50BV2BR Owner's Manual page 44

44 SMART FUNCTIONS
LG ThinQ Application Features
Dryer Cycle
Download new and specialized cycles that are not
included in the standard cycles on the appliance.
Appliances that have been successfully connected
can download a variety of specialty cycles specific to
the appliance.
Only one cycle can be stored on the appliance at a
time.
Once cycle download is completed in the appliance,
the appliance keeps the downloaded cycle until a
new cycle is downloaded.
Venting Tips
Provides venting tips.
Smart Diagnosis™
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Energy Monitoring
The dryer energy usage is affected by the cycles and
options, so you may see some changes in energy
usage from one cycle to another.
Push Alerts
When the cycle is complete or the appliance has
problems, you have the option of receiving push
notifications on a smart phone.
Settings
Set the product nickname and delete product.
NOTE
• To verify the Wi-Fi connection, check that the Wi-Fi
f icon on the control panel is lit.
• LG ThinQ is not responsible for any network
connection problems or any faults, malfunctions, or
errors caused by network connection.
• The machine supports 2.4 GHz Wi-Fi networks only.
• If the appliance is having trouble connecting to the
Wi-Fi network, it may be too far from the router.
Purchase a Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
• The network connection may not work properly
depending on the internet service provider.
• The surrounding wireless environment can make
the wireless network service run slowly.
• This information is current at the time of publication.
The application is subject to change for product
improvement purposes without notice to users.
Using Inicio Remoto(Remote Start)
Use a smart phone to control the appliance remotely
or check to see how much time is left in the cycle.
1
Press the Encendido/Apagado (Power)
button.
2
Load the laundry.
3
Press and hold the Inicio Remoto(Remote
Start) button for 3 seconds to enable the Inicio
Remoto(Remote Start) function.
4
Start a cycle from the LG ThinQ application on
your smart phone.
NOTE
• Once the Inicio Remoto(Remote Start) mode is
enabled, you can start a cycle from the LG ThinQ
smartphone application. If the cycle is not started,
the machine will wait to start the cycle until it is
turned off remotely from the application or the Inicio
Remoto(Remote Start) mode is disabled.
• If the door is opened, Inicio Remoto(Remote Start)
is disabled.
Disabling Inicio Remoto(Remote Start)
When Remote Start is activated, press and hold the
Inicio Remoto(Remote Start) button for 3 seconds.
The operation is subject to the following two
conditions:
1) this device may not cause harmful interference
and
2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three
(3) years from the date on which you purchased the
product.