LG DF50BV2BR Owner's Manual page 34

34 OPERATION
Encendido/Apagado (Power) Button
a
Press the button to turn the dryer Encendido(On)
Press again to turn the dryer Apagado(off).
NOTE
• Pressing the Encendido/Apagado (Power) button
during a cycle will cancel that cycle and any load
settings will be lost.
Cycle Selector Knob
b
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. On Secado
Manual (Manual Dry) cycles, these settings can be
adjusted using the cycle modifier buttons anytime
before starting the cycle.
Inicio/Pausa(Start/Pause) Button
c
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
• If you do not press the Inicio/Pausa(Start/Pause)
button to resume a cycle within 14 minutes, the
dryer turns off automatically and all cycle settings
are lost.
Cycle Modifier Buttons
d
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to view
and select other settings.
Más Tiempo/Menos Tiempo (More Time/Less
e
Time) Buttons
e
Use these buttons with the Tiempo de Secado(Time
Dry) and other Secado Manual (Manual Dry) cycles
to adjust the drying time. Press the Más Tiempo
(More Time) button to increase the selected manual
cycle time by 5 minutes; press the Menos Tiempo
(Less Time) button to decrease the cycle time by 5
minutes.
Time and Status Display
f
The display shows the settings, estimated time
remaining, options, and status messages for the
dryer.
Cycle Option Buttons
g
Press each of these buttons to select additional cycle
options. Press and hold any button marked with an
asterisk for 3 seconds to activate a special function.
Steam Functions
h
LG's steam technology allows you to inject fabrics
with a swirling jet of steam to refresh clothes, reduce
static, and make ironing easier. Simply select the
Steam Fresh™ or Steam Sanitary™ cycle or add a
Steam option to selected cycles.