Vibrator Assembly
Leaving screws inside the device may damage internal components, such as the
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
1
Using the round tip metal tweezers, remove the bottom release film of the new
adhesive tape for the vibrator.
Align the center circle of the tape with the position of the vibrator and attach it
accurately.
2
Gently insert the vibrator in the vibrator hole so that the adhesive faces the metal,
and press the vibrator softly with very weak force.
Be careful to place the vibrator to the correct position.
•
Be careful not to damage the vibrator.
•
Disassembly and Assembly
70