Toyota RAV4 HYBRID 2020 Manual page 559

Enabling 2-way communi-
■
cation with a garage door
(only available for compati-
ble devices)
When enabled, 2-way communi-
cation allows you to check the
status of the opening and clos-
ing of a garage door through
indicators in your vehicle.
2-way communication is only
available if the garage door
opener motor used is a compati-
ble device. (To check device
compatibility, refer to
www.homelink.com.)
1
Within 5 seconds after pro-
gramming the garage door
opener has been completed,
if the garage door opener
motor is trained to
®
HomeLink , both garage
door operation indicators will
flash rapidly (green) and the
light on the garage door
opener motor will blink twice,
indicating that 2-way commu-
nication is enabled.
If the indicators do not flash, per-
2 3
form and within the first 10
presses of the HomeLink
after programming has been com-
6-4. Using the other interior features
pleted.
2
3
■
When the following procedure is
performed, buttons which
already have devices registered
to them can be overwritten:
1
2
®
button
Press a programmed
®
HomeLink button to oper-
ate a garage door.
Within 1 minute of pressing
®
the HomeLink
the garage door operation
has stopped, press the
"Learn" or "Smart" button on
the garage door opener
motor. Within 5 seconds of
the establishment of 2-way
communication with the
garage door opener, both
garage door operation indica-
tors in the vehicle will flash
rapidly (green) and the light
on the garage door opener
motor will blink twice, indicat-
ing that 2-way communica-
tion is enabled.
Reprogramming a single
®
HomeLink button
Press and hold the desired
®
HomeLink button.
When the HomeLink
tor starts flashing orange,
release the HomeLink
ton and perform "Program-
ming HomeLink
20 seconds for the
®
HomeLink
indicator to start
flashing).
559
button, after
®
indica-
®
but-
®
1
" (it takes
6