Toyota RAV4 HYBRID 2016 Manual page 446

Hide thumbs Also See for RAV4 HYBRID 2016:

Table of Contents

6-4. Using the other interior features

Programming HomeLink

Press and release the HomeLink

and check that the HomeLink

stop flashing and programming will not be able to be completed.

transmitter for the device at

the rear view mirror, 1 to 3 in.

(25 to 75 mm) from the

Keep the HomeLink

light in view while programming.

For U.S.A. owners

Press and hold the handheld

transmitter button until the

changes from slowly flashing

orange to rapidly flashing

green (rolling code) or contin-

uously lit green (fixed code),

then release the button.

Programming an entry gate (for U.S.A. owners)/Programming a

device in the Canadian market

Press and release the remote control transmitter button at 2 sec-

ond intervals, repeatedly, until the HomeLink

changes from slowly flashing (orange) to rapidly flashing (green)

(rolling code) or continuously lit (green) (fixed code).

Test the HomeLink

grammed button and observing the indicator light:

● Device with fixed code: If the indicator light is solid/continuous,

programming has been completed and your garage door or

other device should operate when the HomeLink

pressed and released.

RAV4-HV_OM_OM42A56U_(U)

within 60 seconds of

operation by pressing the newly pro-

button you want to program

indicator light flashes (orange).

, or the indicator light will

indicator light

Troubleshooting