Acer H6815BD Series User Manual page 34

24
Management
Choose "ECO", "EcoPro" or "Dynamic Black" to dim the
projector lamp, which will also lower the power
consumption, reduce noise, and extend the lamp life.
("EcoPro" makes the lamp last longer.) Choose "Off" to
return to the normal mode.
ECO Mode
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
High Altitude
speed continuously to cool down the projector's
temperature.
•
Turn Off Mode
•
Auto Shutdown
The projector will automatically shut down while there is
(Minutes)
no signal input detected after the time you set.
•
Menu Display
•
Time (Seconds)
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
Auto Power On HDMI Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord and the HDMI signal is supplied via the HDMI
cable.
When "off" is selected, once the ambient
temperature reaches 35ºC, "ECO" will be activated
automatically. After the ambient temperature
drops below 32ºC, the previous selection will be
activated.
Standard: Enables you to turn off the projector with
fan cooling process by pressing the power button
twice.
Instant Resume: Enables you to restart the projector
immediately within 2 minutes after turning it off.
5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"MENU".