Date And Time - D-Link Vigilance DCS-4714E User Manual

Section 3: Configuration
This section allows you set the time zone and Daylight Saving settings for your camera.
Time Zone Select your time zone from the drop-down menu.
Daylight If your region uses Daylight Saving time, you can enable it here. Select
Savings Time Set date and time manually if you want to manually set the offset and the
period of time that the Daylight Saving correction should be used.
Start Time: If you enabled the previous option, set the date and time that Daylight
Saving should start.
End Time: Set the date and time that Daylight Saving should end.
Current PC Click Save to synchronize the camera according to your current PC time.
Time
Set Manually Enter a time and click Save to set it manually.
NTP Server Enable this option to set your camera's time using an NTP server, then
select an NTP server to use from the drop-down box.
NTP Port Enter the port to use to access the NTP server.
Check time Enter an interval (in seconds) at which to check the camera's time against
interval the NTP server.
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual

Date and Time

Time Settings
62