Table of Contents
Advertisement
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you'll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
bag
For installing the hanger bracket and wiring the fan
x15
Grommet
bag
x5
Blade
For installing the blades
Spare Parts
bag
For your convenience,
you may receive extra fasteners.
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
M0242-01 r091919
Here is what comes in your box:
Wood Screw
WIre Nut
Washer
x2
x4
x15
bag
Blade Screw
Blade Arm Screw
x5
Blade Arm
Pullchains and extra downrod
IMPORTANT
x2
x10
Note:
Fan style may vary.
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Ceiling Bracket
Canopy
Downrod
Upper Switch Housing
Lower Switch Housing
Glass
x3
bag
Socket Ring
x3
Socket Ring Tool
Bulb
x3
For installing the light fixture
1886
Canopy Screw
bag
x2
For installing the canopy
Motor
x6
Light Kit Screws
1.888.830.1326.
2
Advertisement
Table of Contents
