Table of Contents
Advertisement
Interior features
Shelving
The oak shelves have been designed to allow for even air distribution around your wine
bottles. Depending on your model there are a range of adjustable shelves that can be
rearranged to suit your storage needs.
Standard shelf (all models)
These shelves are located in both zones and is designed to hold up to 22 Bordeaux
bottles depending on the support lugs selected. The ideal loading arrangement for
these shelves is to have bottle necks interlocking.
Presentation shelf (excludes RF106 model)
These shelves are located in the upper zone only
and is designed to hold up to 5 Bordeaux bottles
or to store opened bottles when in the tilted
state. When not using the Presentation shelf a
total of 9 Bordeaux bottles can be stored in the
upright position.
To tilt the Presentation shelf:
Hold the front and back edge of the shelf firmly
1
and lift vertically to dislodge from the support
lugs (refer to A).
Pull the shelf slightly forward and tilt the front
2
edge of the shelf down to the next support lugs
(refer to B).
Push the shelf back into the Wine Cabinet until
3
you feel it secure into the support lugs (refer to C).
Double Tier shelf (excludes RF106 model)
These shelves are located in the bottom zone only and is designed to hold up to
11 Bordeaux bottles. The ideal loading arrangement for these shelves is to have bottle
necks facing the back of the Wine Cabinet.
Single Tier shelf (all models)
These shelves are located in the bottom support lugs of the bottom zone only and is
designed to hold 6 Bordeaux bottles at any one time.
If removing this shelf please take care of the wine bottles stored underneath (when not
storing Bordeaux bottles), as bottles can be easily dislodged.
INTERIOR AND EXTERIOR FEATURES
A
B
C
19
Advertisement
Table of Contents
