Table of Contents
Advertisement
Option
Description
Data Wipe
This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal SATA HDD/SSD
● Internal M.2 SATA SDD
● Internal M.2 PCIe SSD
● Internal eMMC
BIOS Recovery
This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.
● BIOS Recovery from Hard Drive—enabled by default
● Always perform integrity check—disabled by default
Power management
Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Enable Intel
● Enable Intel Speed Shift Technology
Speed Shift
Default setting: Enabled
Technology
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Allows you to enable USB devices to wake the system from Standby.
Support
● Enable USB Wake Support
Wake on WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
● Disabled
● WLAN
Default setting: Disabled
Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.
● Enable peak shift—is disabled
● Set battery threshold (15% to 100%) - 15 % (enabled by default)
Advanced
This option enables you to maximize the battery health. By enabling this option, your system uses the
Battery Charge
standard charging algorithm and other techniques, during the non work hours to improve the battery
Configuration
health.
Enable Advanced Battery Charge Mode- is disabled
26
System setup
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Advertisement
Table of Contents
