Braun 9 Series Manual page 36

Shaver turns off
with fully
charged battery.
Shaver head is
damp.
CLEAN&CHARGE STATION
Cleaning does
not start when
pressing the
start button.
Increased
consumption of
cleaning fluid.
36
Foil and cutter are worn
which requires more
power than the motor
can deliver.
The appliance turns off.
1. Drain of the
Clean&Charge Station
is clogged.
2. Cleaning cartridge has
been used for quite
a while.
1. Shaver is not placed
properly in the
Clean&Charge Station.
2. Cleaning cartridge
does not contain
enough cleaning fluid
(level indicator blinks
red).
3. Appliance is in stand-by
mode.
Drain of the
Clean&Charge Station
is clogged.
– Replace Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
1. Clean the drain with a wooden
toothpick.
2. The alcohol/isopropanol proportion
has decreased while the oil
proportion has increased. Remove
residue with a cloth.
1. Insert shaver into the Clean&Charge
Station (contacts of the shaver need
to align with contacts in the station).
2. Insert new cleaning cartridge.
3. Press start button again.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.