2. Setting up the
monitor
2.1 Installation
Package contents
1
* Earphone-Hang
*HDMI
*Different according to region
Note
Use only AC/DC adapter model: Philips
ADPC2090.
Quick start
27M1N5200P
27M1N5200PA
Register your product and get support at www.philips.com/welcome
AC/DC Adapter
*DP
* USB A-B
Install the base
2
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of the
base.
(3) Use a screwdriver to tighten the
screw located at the bottom of the
base, and secure the base to the
stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scrath or damage the screen.
5