Setup Instructions; Product Specifications - Intex ECO20110-1 Owner's Manual

PRODUCT SPECIFICATIONS

The sand filter removes suspended particles and sanitize your pool. Pool chemistry is a
specialized area and you should consult your local pool service specialist for details.
Model:
Power:
Amperage:
Ideal Salt Level:
Maximum Sanitizer Output/hour: 11 grams/hour
E.C.O. Cell Output Current:
Maximum working pressure:
Effective filtering area:
Maximum Flow Rate:
Recommended filtering
media quantity:
Recommended filtering
media (Not included):
Limited Warranty:
HOW THE ELECTROCATALYTIC OXIDATION WORKS
The Electrocatalytic Oxidation (E.C.O.) is an Advanced Oxidation Processes (AOPs). When direct
current is applied to the electrocatalytic oxidation electrodes, water will be discharged to generate
"hydroxyl radicals". The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
• The system must be installed on a solid level and vibration-free base.
• Provide a location protected from the weather, moisture, flooding and freezing temperature.
• Provide adequate access, space and lighting for routine
maintenance.
• Pump motor requires free circulation of air for cooling.
Do not install the pump in a damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
Motor pre-filtering assembly setup:
1. Remove the sand filter and its accessories from the packaging
carefully and inspect for any visible damage. For missing or
damaged parts contact the appropriate Intex Service Center
listed in the separate "Authorized service Centers" sheet.
2. In a counter-clockwise motion unscrew the leaf trap cover
(14) from the pre-filter housing. Take out the basket (16) and
filter housing nut (17) (see drawing 10).
3. Connect the pre-filter housing to the motor water inlet. Note:
Align the connector in the pre-filter housing with the water inlet
on the motor (see drawing 11).
SAVE THESE INSTRUCTIONS
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5" X 10.3" PANTONE 295U 05/04/2018
ECO20110-1
110-120 Volt AC
Saltwater System - 1.1 A;
Filter Pump - 4.8 A
3000 ppm (parts per million)
800mA
2 bar (30 psi)
2 2
0.13 m (1.44 ft )
8140 liters/hour (2150 gallons/hour) 6055 liters/hour (1600 gallons/hour)
No. 20 silica sand 45 Kg (100 Lbs)
or glass sand 32 Kg (70 Lbs).
No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
see "Limited Warranty"

SETUP INSTRUCTIONS

English
ECO15110-1
110-120 Volt AC
Saltwater System - 0.9 A;
Filter Pump - 2 A
3000 ppm
7 grams/hour
500mA
2 bar (30 psi)
2 2
0.1 m (1.1 ft )
No. 20 silica sand 25 Kg (55 Lbs)
or glass sand 18 Kg (40 Lbs).
14
40
16
17
Page 8
261
PO
10
11