Other Features - Samsung 4 Series Manual

Preference Features

Other Features

¦
O
MENUm → System → Menu Language → ENTERE
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE
button.
2. Choose desired language and press the ENTERE
button.
✎
Choose between English, Português and
Español.
Caption
(On-Screen Text Messages)
■
Caption (Off / On): You can switch the caption function
on or off. If captions are not available, they will not be
displayed on the screen.
✎
The Caption feature does not work in Component
or HDMI modes.
■
Caption Mode: You can select the desired caption
mode.
✎
The availability of captions depends on the
program being broadcasted.
CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog
TV channel mode or when a signal is supplied from
an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
20
English
Screen Burn Protection
O
MENUm → System → Screen Burn Protection →
ENTERE
To reduce the possibility of screen burn, this unit is equipped
with screen burn prevention technology. The Time setting
allows you to program the time between movement of the
picture in minutes.
■
Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after image on the screen.
✎
Optimum condition for pixel shift
Horizontal
Vertical
Time (minute)
✎
The Pixel Shift value may differ depending on the
monitor size (inches) and mode.
✎
This function is not available in the Screen Fit
mode.
■
Auto Protection Time (Off / 10 min. / 20 min. / 40
min. / 1 hour): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
■
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
✎
The after-image removal function has to be
executed for a long time (approximately 1 hour) to
effectively remove after-images on the screen. If
the after-image is not removed after performing the
function, repeat the function again.
✎
Press any key on the remote control to cancel this
feature.
■
Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Item TV / HDMI
0~4 3
0~4 3
1~4 min 4 min