Part Identification Chart - Weslo WLEL31216.2 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 16mm M6 x 14mm M8 x 16mm
M10 Locknut
M8 Locknut
Screw (82)–6 Screw (81)–8 Screw (78)–2
(74)–1
(69)–3
M8 x 40mm Bolt (80)–2 M8 x 68mm Screw (73)–4
M8 x 35mm Bolt (68)–1
M10 x 73mm Bolt (75)–1
M10 x 20mm
Screw (77)–4
6