How To Use The Stepper Climber - Weslo WLEL31216.2 User Manual

HOW TO USE THE STEPPER CLIMBER

HOW TO ADJUST THE RESISTANCE OF THE
PEDALS
To change the
resistance of the
pedals, turn the
adjustment collars
(A) on the upper
ends of the resis-
tance cylinders.
The arrows on the
resistance cylinders
and the marks on
the collars show
which resistance level has been selected. Make sure
that both resistance cylinders are at the same
resistance setting.
WARNING:
cylinders may become hot during use. Touch
only the adjustment collars on the resistance
cylinders when changing the resistance of the
pedals.
A
The resistance
HOW TO ADJUST THE RESISTANCE OF THE
HANDLEBARS
To increase the
resistance of the
handlebars, turn
the resistance
knob (B) clockwise;
to decrease the
resistance, turn the
knob counterclock-
wise. IMPORTANT:
Stop turning the
knob when turning becomes difficult, or you may
damage the stepper climber.
HOW TO ADJUST THE HEIGHT OF THE
HANDLEBARS
To adjust the height
of the handlebars,
press and hold the
adjustment pin (C)
on each handlebar,
move the handle-
bar to the desired
height, and then
release the pin into
one of the adjust-
ment holes in the
climbing carriage.
Make sure to
adjust both handlebars to the same height.
14
B
C