Flesh Tone; Rgb Only Mode; Colour Space Settings; Input Signal Plus - Samsung SBB-SNOWJAU User Manual

Flesh Tone

Adjust the flesh tone colour by increasing or decreasing red levels.

RGB Only Mode

Fine-tune the saturation and tint of the red, green, and blue colour channels.
• Off / Red / Green / Blue
" Enabled when Picture Mode is set to Movie.

Colour Space Settings

Configure colour space settings to refine the spectrum of colours on your screen.
Colour Space
Choose a colour space.
• DCI-P3 / Adobe RGB / BT.709 / Custom
" To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.

Input Signal Plus

Expands the input signal range for HDMI connections.
• HDMI1 (Off ( ) / On ( ))
• HDMI2 (Off ( ) / On ( ))
" When Input Signal Plus is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported.
When Input Signal Plus is set to Off, up to the 1920 x 1080 @ 60 Hz resolution is supported.
56