Replacing The Battery; Specifications; Frequently Asked Questions - Casio fx-95SG PLUS User Manual

Replacing the Battery

A low battery is indicated by a dim display, even if contrast is adjusted, or by
failure of figures to appear on the display immediately after you turn on the
calculator. If this happens, replace the battery with a new one.
Important: Removing the battery will cause all of the calculator's memory
contents to be deleted.
1. Press
2. Remove the cover as shown in the illustration
and replace the battery, taking care that its plus
(+) and minus (–) ends are facing correctly.
3. Replace the cover.
4. Initialize the calculator:
(CLR)
• Do not skip the above step!

Specifications

Power Requirements: AAA-size battery R03 (UM-4)
Approximate Battery Life: 17,000 hours (continuous display of flashing
Power Consumption: 0.0002 W
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 13.8 (H)
1
Approximate Weight: 100 g (3.5 oz)

Frequently Asked Questions

How can I perform input and display results the same way I did on a
model that does not have Natural Textbook Display?
Perform the following key operation:
"Configuring the Calculator Setup" on page E-5 for more information.
How can I change a fraction form result to decimal form?
How can I change a fraction form result produced by a division
operation to decimal form?
See "Toggling Calculation Results" on page E-9 for the procedure.
What is the difference between Ans memory, independent memory,
and variable memory?
Each of these types of memory acts like "containers" for temporary storage
of a single value.
Ans Memory: Stores the result of the last calculation performed. Use this
memory to carry the result of one calculation on to the next.
Independent Memory: Use this memory to totalize the results of multiple
calculations.
Variables: This memory is helpful when you need to uses the same value
multiple times in one or more calculations.
(OFF) to turn off the calculator.
(All)
cursor)
80 (W)
1
/ (H) 3 / (W)
2 8
(Yes)
162 (D) mm
3
6 / (D)
8
E-24
Screw Screw
1
(SETUP) (LineIO). See
Screw Screw