Table of Contents
Advertisement
Equation Calculations (EQN)
You can use the following procedure in the EQN Mode to solve simultaneous
linear equations with two or three unknowns, quadratic equations, and cubic
equations.
1. Press
2. On the menu that appears, select an equation type.
To select this calculation type:
Simultaneous linear equations with two
unknowns
Simultaneous linear equations with
three unknowns
Quadratic equation
Cubic equation
3. Use the Coefficient Editor that appears to input coefficient values.
x
• To solve 2
the following for the coefficients (
3
.
• To change a coefficient value you already have input, move the cursor
to the appropriate cell, input the new value, and then press
• Pressing
Important: The following operations are not supported by the Coefficient
Editor:
,
also cannot be input with the Coefficient Editor.
4. After all the values are the way you want, press
• This will display a solution. Each press of
solution. Pressing
the Coefficient Editor.
• You can scroll between the solutions using the
• To return to the Coefficient Editor while any solution is displayed, press
.
Note: • With Natural Display, solutions may be displayed using fraction display
format, but solutions will not be displayed using any format that includes
the square root (
notation on the solution screen.
Changing the Current Equation Type Setting
Press
(EQN) and then select an equation type from the menu that
appears. Changing the equation type causes the values of all Coefficient
Editor coefficients to change to zero.
EQN Mode Calculation Examples
x
y
+ 2
= 3, 2
(EQN)
(EQN) to enter the EQN Mode.
x
2
+
– 3 = 0, for example, press
will clear all of the coefficients to zero.
(M–),
while the final solution is displayed will return to
) symbol. • Values cannot be converted to engineering
x
y
+ 3
= 4
(a
X + b
n
a
= 2,
(STO). Pol, Rec, and multi-statements
Y = c
)
n
n
1
2
3
2
3
4
E-19
Press this key:
(a
X + b
Y = c
n
n
(a
X + b
Y + c
n
n
2
(aX
+ bX + c = 0)
3
2
(aX
+ bX
+ cX + d = 0)
in step 2, and then input
b
c
= 1,
= –3): 2
.
will display another
and
)
n
Z = d
)
n
n
1
.
keys.
Math
Math
(X=) –1
(Y=)
2
Advertisement
Table of Contents
