Use Your Soundbar; Select Modes - Philips 7000 Series User Manual

2
Press and hold the Pair button on the
rear of the subwoofer for 3 seconds.
» The indicator on the subwoofer
will rapidly blink.
3
Then press
or remote control to switch the
soundbar ON.
» The indicator on the subwoofer
will become solid when successful.
4
If the indicator still keeps blinking,
repeat step 1-3.
Tips
•
The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
•
Remove any objects between the subwoofer
and the soundbar.
•
If the wireless connection fails again, check if
interference from an electronic device) around
interferences and repeat the above procedures.
14
EN
on the soundbar
4 Use your
soundbar
This section helps you use the soundbar
to play audio from connected devices.
Before you start
•
Make the necessary connections
described in the quick start guide
and the user manual.
•
Switch the soundbar to the correct
source for other devices.
•
to the main socket, the unit will be in
standby mode.
•
Press the button on the remote
control or on the soundbar to switch
the soundbar ON or OFF.
•
Disconnect the mains plug from the
mains socket if you want to switch

Select modes

Press the Source button repeatedly on
the soundbar or press the AUX, OPTICAL,
HDMI ARC, BT/Pair, USB buttons on the
remote control to select the desired mode.
» Switch the playback source and the
top indicator lights up accordingly.