Pair Your Remote Control To Tv; Voice Search; Ir Sensor - Philips 50PUT7906 User Manual

1 - EXIT
To leave from current menu or App.
2 - Volume
Press + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 - AD / INFO
AD - To access the Audio Description and toggle to
switch on and off.
INFO - Long press to open the programme
information screen.
5 - Channel
Press + or - to switch to the next or previous
channel in the channel list. To open the next or
previous page in Text/Teletext.
6 - Mute
Press to mute the sound or to restore it.
7 - SUBTITLE
To open Subtitle page.
3.2
Pair Your Remote Control to
TV
This remote control uses both Bluetooth and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared) for
most operations.
• To use advanced operation like voice search and
remote control keyboard, you need to pair (link) the
TV with the remote control.
When you start the initial TV installation, the TV
invites you to long press the PAIR key until you see
the light pulsing on the remote. By doing so, the
pairing will be done.
Note:
1 - Once the remote control has entered pairing
mode successfully, the blue LED indicator ring around
the microphone on the front side of the remote
control starts blinking.
2 - The remote control must be kept close to the TV
(within 1m distance) during pairing in order to ensure
success.
3 - If the TV does not launch the voice control
field when press Google Assistant™, pairing was
unsuccessful.
4 - It is advisable to wait until the set has fully started
up and launched all background processes before
pairing mode is entered as the toast message
containing further instructions may appear too late,
thereby negatively impacting the pairing procedure.
Pairing again
If the pairing with the remote control was lost, you
can pair the TV with the remote control again. Press
the PAIR key until you see the light pulsing on the
remote for pairing.
Unpair
Press and hold 0 and Mute key on the remote
control until you see the light pulsing on the remote.
3.3

Voice Search

You can search for videos, music or anything else on
the Internet by simply using your voice. You can
speak into the microphone on the remote control.
You need to pair the remote control to the TV before
use voice search.
To use Voice...
1 - Press Google Assistant™ on remote control, the
blue light on the remote control lights up and the
search field opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. You can speak for 10 seconds before
the microphone switches off. It might take some time
for the results to appear.
3 - In the list of search results, you can select the
item you want.
3.4

IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
9