Table of Contents
Advertisement
Debris filter
It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may
reduce the bubble effect.
NOTE
• The "Clean drain filter" message appears on the control panel display after every 100 washes.
• If the pump filter is clogged, an information code of "Check drainage" appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational
failure or a leak.
Untitled-2 57
1. Turn off the washing machine, and unplug the power
cord.
2. Drain the remaining water inside the drum. See the
Emergency drain section.
3. Open the filter cover.
-
TYPE 1: Gently press the top area of the filter
cover to open.
-
TYPE 2: Push down the latch of the filter cover to
open.
4. Turn the debris filter knob to the left, and drain off
the remaining water.
5. Clean the debris filter using soft brushes. Make
sure the drain pump propeller inside the filter is
unclogged.
6. Reinsert the debris filter, and turn the filter knob to
the right.
NOTE
• Some debris filters feature a safety knob that is
designed to prevent accidents by children. To open
the safety knob of the debris filter, push in and turn
it anticlockwise. The spring mechanism of the safety
knob helps open the filter.
• To close the safety knob of the debris filter, turn it
clockwise. The spring makes a rattling sound, which
is normal.
English 57
2022-08-29
11:37:59
Advertisement
Table of Contents
