13) Unscrew the four TORX+ size 6 screws in the
order shown. Do not use them again. Discard them.
15) Use the SS-93 to lever out the UI SHIELDING ASSY,
LCD and engine board near the shown clips.
17) Use the SS-93 to open the LCD connector. While
opening the connector, be careful not to damage
the connector or the components nearby!
14
14) Open the USB COVER.
16) Now the D-COVER ASSY can be separated.
18) Use the SS-93 to release the shown clips of the
UI SHIELDING ASSY.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 2690
RM-635
Service Manual Level 1&2
Version 1.0
ISSUE 1