Home Connect; Home Connect® Quick Start; Home Connect® Settings; Remote Start - Bosch 300 DLX Series Use And Care Manual

To be able to use Home Connect®, you must first set up
the connection to the WLAN home network (Wi-Fi
the Home Connect® app.
The Home Connect® app guides you through the entire
registration process. Follow the instructions in the
Home Connect® app to implement the settings.
Tips
¡ Consult the Home Connect® documents supplied.
¡ Follow the instructions in the Home Connect® app as
well.
Note: Also note the safety information in this instruction
manual and ensure that it is also observed when operating
the appliance using the Home Connect® app.
14.1 Home Connect® quick start
Connect your appliance to a mobile device quickly and
easily.
Setting up the Home Connect® app
Install the Home Connect® app on your mobile device.
1.
2
Start the Home Connect® app and set up access for
2.
Home Connect®.
The Home Connect® app guides you through the entire
registration process.
Setting up Home Connect®
Requirements
¡ The Home Connect® app is installed on your mobile
device.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡ The appliance door is closed.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
2
Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are
trademarks of Google LLC.
Open the Home Connect® app and scan the following
1.
1
) and to QR code.
Follow the instructions in the Home Connect® app.
2.
14.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
14.3 Remote Start
You can use the Home Connect® app to start the
appliance with your mobile device.
Note: You can change settings using the Home Connect®
app.
Activating Remote Start
Requirements
¡ The appliance is connected to your WLAN home
network.
¡ The appliance is connected to the Home Connect® app.
¡ A program is selected.
Press ⁠ .
▶
If you open the appliance door, the function is
automatically deactivated.
button lights up.
a
Tip: To deactivate the function, press ⁠ .
Note
The following settings are possible using the
Home Connect® app:
¡ Deactivate the function permanently.
¡ Select the function using the
the default preset at the factory.
¡ Activate the function permanently. With this setting
pressing
Home Connect® en-us
button. This setting is
button is not necessary.
23