Before Using For The First Time; Initial Use; Rinse Aid System; Rinse Aid - Bosch 300 DLX Series Use And Care Manual

en-us Before using for the first time
Setting
2 max. ø
3 max. ø
Tip: If you remove the 3rd rack, you can place large items
of dishware in the lower rack.
8 Before using for the first time

Before using for the first time

Before using for the first time
8.1 Initial use
Before the first use, or after a factory reset, you will need
to configure the settings.
Tip: Connect your appliance to a mobile device. You can
conveniently change all settings using the
Home Connect® app.
→ "Home Connect® quick start", Page 23
Requirement: The appliance has been installed and
connected.
Add rinse aid. → Page 14
1.
Switch on the appliance.
2.
Set the amount of rinse aid. → Page 14
3.
Add detergent.
4.
Start the Program with the highest cleaning temperature
5.
without dishware.
To remove any marks from water or other residues, we
recommend you operate the appliance without dishware
before using it for the first time.
Tip: You can change these settings and other Basic
settings → Page 21 at any time.
9 Rinse aid system

Rinse aid system

Rinse aid system
9.1 Rinse aid
For optimum drying results, use rinse aid.
Only use rinse aid intended for household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights up, fill the dispenser
with rinse aid. Only use rinse aid intended for household
dishwashers.
14
Upper rack
20.5 cm / 8"
23 cm / 9"
Lower rack
30.5 cm / 12"
28 cm / 11"
Press the catch on the lid of the dispenser for rinse aid
1.
and lift ⁠ .
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it from the tub.
3.
Spilled rinse aid can cause excessive frothing during
the wash cycle.
Close the lid of the dispenser for rinse aid.
4.
a The lid clicks into position.
9.2 Setting the amount of rinse aid
If there are streaks or water spots on dishware, change
the amount of rinse aid.
Press ⁠ .
1.
2
1
max