Volvo V50 2010 Owner's Manual page 229

on or the remote control key inserted into the
ignition switch.
Dipped beam
Removing the cover and bulb
1. Undo the whole lamp housing, see
page 228.
2. Bend aside the catches and remove the
cover.
3. Unplug the connector from the bulb.
4. Release the spring clip securing the bulb.
Press it in/down.
5. Pull out the bulb.
Fitting a new bulb
1. Fit the new bulb. It can only fit in one posi-
tion.
2. Press the spring clip in/up and then slightly
to the right in order to snap it into position.
3. Press the connector back on.
4. Refit the plastic cover.
5. Refit the lamp housing, see page 228.
09 Maintenance and service
Replacing bulbs
Main beam, Halogen
The illustration shows a halogen bulb.
1. Undo the whole lamp housing, see
page 228.
2. Undo the cover, located above the lamp
housing, by turning it anticlockwise.
3. Left-hand headlamp:
Turn the bulb holder anticlockwise.
Right-hand headlamp:
Turn the bulb holder clockwise.
4. Withdraw the bulb holder and change the
bulb.
09
``
229