Cleaning The Outboard Motor; Checking Painted Surface Of Outboard Motor; Periodic Maintenance; Replacement Parts - Yamaha F400A Owner's Manual

Table of Contents

Advertisement

EMU44342

Cleaning the outboard motor

When cleaning the outboard motor, the top
cowling must be installed.
(1) Wash the exterior of the outboard motor
using fresh water. NOTICE: Do not
spray water into the air intake.
1
1. Air intake
(2) Drain the cooling water completely out of
the outboard motor. Clean the body
thoroughly.
EMU28463
Checking painted surface of outboard
motor
Check the outboard motor for scratches,
nicks, or flaking paint. Areas with damaged
paint are more likely to corrode. If necessary,
clean and paint the areas. Touch-up paint is
available from your Yamaha dealer.
EMU2850F

Periodic maintenance

EWM01872
These procedures require mechanical
skills, tools, and supplies. If you do not
have the proper skills, tools, or supplies to
perform a maintenance procedure, have a
Yamaha dealer or other qualified mechan-
ic do the work.
The procedures involve disassembling the
motor and exposing dangerous parts. To
reduce the risk of injury from moving, hot,
or electrical parts:
 Turn off the engine and keep the key(s)
and engine shut-off cord (lanyard) with
[ECM01841]
you when you perform maintenance un-
less otherwise specified.
 The power trim and tilt switches operate
1
even when the ignition key is off. Keep
people away from the switches whenev-
er working around the motor. When the
motor is tilted, keep away from the area
under it or between it and the clamp
bracket. Be sure no one is in this area
before operating the power trim and tilt
mechanism.
 Allow the engine to cool before handling
hot parts or fluids.
 Always completely reassemble the mo-
tor before operation.
Maintenance, replacement, or repair of
the emission control devices and systems
on models affixed with an emission con-
trol label may be performed by any marine
engine repair establishment or individual.
All warranty repairs, however, including
those to the emission control system,
must be performed by an authorized
Yamaha marine dealership.
EMU28512

Replacement parts

If replacement parts are necessary, use only
genuine Yamaha parts or parts of equivalent
design and quality. Any part of inferior quality
may malfunction, and the resulting loss of
control could endanger the operator and pas-
sengers. Yamaha genuine parts and acces-
sories are available from your Yamaha dealer.
Maintenance
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl400aF450aFl450a

Table of Contents