Wireless Color Weather Station
with Barometric Pressure & Custom Temperature Alerts
Model: 308-1425Bv3
DC:072022
Full manual can be found under the Support tab here:
POW E R U P
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5.0 Volt Power Cord into an outlet, then into your
Forecast Station. Optional: Install 3-AAA Batteries into your
Station for backup.
3. Once the Sensor is reading to your Station, place the Sensor
outside in a shaded location to protect from sun's heat.
Watch sensor mounting video:
Outdoor Sensor
TX141TH-Bv4
ATOM IC T IM E S IGNA L-W W V B
The station will search for WWVB Atomic Time Signal at UTC:
•
07:00 and if no reception, will try again at 08:00, 09:00, 10:00
and 11:00.
• Press the TIME SET button to start or stop a search for the Atomic Time
Signal WWVB.
For information about WWVB Atomic time visit:
•
bit.ly/308-1426bv2
bit.ly/TH_SensorMounting
Forecast Station
308-1425Bv3
bit.ly/AtomicTime
Page 2
SE T T I N G S
1. Hold the TIME SET button to enter the Settings Menu.
2. Use the ARROW buttons to adjust, and TIME SET to confirm.
3. Press the SNOOZE/LIGHT button at any time to exit.
Settings Menu Order:
WWVB ON/OFF
•
Time Zone
•
Time Zones
DST ON/OFF
AST = Atlantic
•
EST = Eastern
12/24 Hour
•
CST = Central
•
Hour
MST = Mountain
Minutes
•
PST = Pacific
Year
AKT = Alaska
•
HAT = Hawaii
Month
•
Date
•
Fahrenheit/Celsius
•
Note: If WWVB OFF is selected, skip to 12/24 hour time.
Note: Weekday will set automatically when year, month and date
are set.
2 4 H O UR P R E SSUR E H I STO RY G R A PH
•
The bar graph indicates your pressure history
trend over the past 24 hours.
Read the graph from left to right.
•
• If bars are rising, weather should improve.
• If bars are falling, weather may worsen.
Page 3