SUZ-KA18NA
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10) Remove the screws of the back panel.
(11) Remove the back panel.
TCH022
NOTE: Turn OFF power supply before disassembling.
Photo 1
Screw of the top panel
Screws of the back panel
Photo 2
Screw of the top panel
Screws
of the
cabinet
Screw
of the
service
panel
Screw of
the valve
cover
40
PHOTOS
Screws of the cabinet
Screws of
the cabinet
Screws of
the back
panel