Advertisement
Attach the Brackets (E) horizontally to the top of the back of the Nightstand using the Small Screws (C).
Screw the remaining Brackets (E) vertically 1 inch below the brackets attached to the Nightstand
using the large screws (D). The Large Screws (D) should be screwed into a stud in the wall. Align the
Brackets vertically and string in the Retention Belt (F). Confirm Strap is securely laced and locked.
C
F
E
D
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly apply beeswax polish as needed.
Finish can be affected by heat or extended contact with oils or wine.
Customer Service: 800-367-2810
Online:
www.ballarddesigns.com
Page 4 of 4
Advertisement
