Table of Contents
Advertisement
Installation Procedure (continued)
Floor Case
1
Measure and mark the hole position.
2
Drill a hole and mount bracket.
Drain Hose
Drain hose can pass through the indoor unit
follow figure below.
After fixing the indoor unit, open front grille and then insert refrigerant pipe, drain hose and electric cable from
outdoor through the wall into the unit case, then connect drain hose together and arrange it.
Note : Do not put the drain hose end into water.
Unit Coupling
1
Connect electric cable to terminal box.
2
Connect refrigerant pipe to flare connector.
12
FLOOR/CEILING
Ceiling case
Verification of condensate water drainage:
Fill the drain pan with water and observe
evacuation.
Terminal box
Floor case
Flare connector
Advertisement
Table of Contents
