Specify Network Mode; Configure Apn; Configure Apn Settings - TP-Link M7000 User Manual

4g lte mobile wi-fi
Hide thumbs Also See for M7000:
Table of Contents

Advertisement

Chapter 6
6 1

Specify Network Mode

This Mobile Wi-Fi supports three modes of network connection: 4G Preferred,
4G Only and 3G Only. If your SIM card supports WCDMA, select 3G Only; if your
SIM card supports FDD-LTE or TDD-LTE, select 4G Preferred or 4G Only as
needed. In general, the 4G network is faster than the 3G one.
1. Open your tpMiFi app and log in with the password you set.
2. Go to
Tools
>
Internet Settings
3. Select
4G
Preferred,
4. Tap Done.
6 2

Configure APN

6 2 1

Configure APN Settings

If you are in a location beyond your mobile carrier's service area, you may need to
configure the dial-up settings to access the internet provided by a local mobile
carrier.
1. Open your tpMiFi app and log in with the password you set.
2. Go to
Tools
>
Internet Settings
3. Tap
to build an APN profile.
4. Specify a name for the profile and fill in the parameters provided by your
carrier.
>
Network
4G Only
or
3G Only
>
APN
Management.
Customize Your Network
Mode.
as needed.
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

M7010

Table of Contents