Adjusting A Headlight Beam - Yamaha GRIZZLY 700 2013 Owner's Manual

4. Unhook the headlight bulb holder, and then
remove the burnt-out bulb.
1. Headlight bulb holder
2. Headlight bulb
8
5. Place a new headlight bulb into position, and
then secure it with the bulb holder. NOTICE:
Do not touch the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the luminos-
ity of the bulb, and the bulb life will be ad-
versely affected. Thoroughly clean off any
dirt and fingerprints on the headlight bulb
using a cloth moistened with alcohol or
thinner.
[ECB00651]
1. Do not touch the glass part of the bulb.
6. Connect the headlight coupler.
7. Install the headlight bulb cover. NOTICE:
Make sure the headlight bulb cover is se-
curely fitted and seated properly.
8. Install the cover at the rear of the headlight.
9. Adjust the headlight beam if necessary.
EBU25551

Adjusting a headlight beam

ECB00690
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
8-62
[ECB01080]