Preparations
Installation
Attaching the Stand
"
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
"
Disassembly is the reverse order of assembly.
1
Put the stand base onto the stand
neck as the direction shown in the
figure. Check that the stand neck is
firmly connected.
3
Push the assembled stand into the main body in the direction of the arrow
as shown in the figure.
4
Stand up the monitor as shown in
the figure.
2
Tightly fasten the connecting screw
at the bottom of the stand base.
5
Stand assembly is complete.
- 9 -