LG US66 Series Installation Manual
Hide thumbs
Also See for US66 Series:
- Installation manual (68 pages) ,
- Installation manual (68 pages) ,
- Installation manual (68 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG US66 Series
Summary of Contents for LG US66 Series
- Page 1 INSTALLATION MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. US66* US76* WS96* ES96* *mfl71684501* www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
- Website Shortcut - Input Shortcut Installation Menu - Hotel Directory - Portal Editor Introduction - Portal Manager LG Hotel Mode Setup Media Share - Power On Status - Smart Share - Volume - Screen Share - Key Management - Media Renderer... - Page 3 IR Codes External control device Setup RS-232C Setup Phone jack Type Type of Connector : D-Sub 9-Pin Male RS-232C Configurations Communication Parameters IR OUT Using Guide - Suitable / Not Recommend remote-controller data format - IR Receiver specifications Command Reference List Transmission / Receiving Protocol...
-
Page 4: Location And Function Of Controls
Location and Function of Controls LED Clock Connection (Depending on model) Parts and Button This TV can be connected to a LED Clock via the CLOCK port. CLOCK LED Clock (*Not Provided) Basic functions Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold All running apps will close. -
Page 5: First Use Wizard
First Use Wizard * Images shown may differ from your TV. (Depending on model) • There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by Start button. -
Page 6: Basic Settings
Basic Settings (Depending on model) This menu is for basic settings related to language, network, portal, voice service coverage and programme tuning without SI (Pro:Centric) setting. There are four steps for it. Language & Location (Depending on model) • Select the Language and Country. Some countries need to select the Time Zone. -
Page 7: Network Settings
Network Settings (Depending on model) • Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 25) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK) -
Page 8: Portal Settings
Portal Settings (Depending on model) • Set the Portal Mode and Portal Auto Start. Portal Mode (Depending on model) • You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal). Portal Auto Start •... -
Page 9: Voice Service Coverage
Voice Service Coverage (Depending on model) • Set the voice service coverage. You can set LG Service Country and Service Area Postcode(Depending on model) for voice service. -
Page 10: Data Cloning
Data Cloning (Depending on model) Access Data cloning menu of TV Manager application for applying cloning file. Solution Settings (Depending on model) The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”... -
Page 11: Automatically For Setup
Automatically for Setup (Depending on model) From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV. Also, you can configure the network environment. - Page 12 • If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 46) • If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Settings” on page 25) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW.
- Page 14 This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data programme, select the Next.
- Page 15 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 16: Manually For Setup
Manually for Setup (Depending on model) Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To continue, move and select Next. Please select the Manual Pro:Centric. - Page 17 Configure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
- Page 18 Downloading the Pro:Centric application files takes few minutes.
-
Page 19: Installation Menu Settings
After the installation is completed, the following screen will be displayed. Installation Menu Settings (Depending on model) Access Installation menu for commercial feature settings. -
Page 20: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 21: Lg Hotel Mode Setup
LG Hotel Mode Setup When ‘LG Hotel Mode Setup’ is set to On, all functions of Hotel Mode apply. Power On Status • Decide to select working status of TV Set when turn on main power. • You can select PWR, STD, LST. -
Page 22: Volume
- When selected to 'On' , if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used. - Access to a volume in ‘Timer Power On’ must be fixed to start volume when ‘LG Hotel Mode Setup’ (On) and ‘Start Volume’ (Off, 0 ~ 100) were set simultaneously. -
Page 23: Limited Mode
Limited Mode • Configure TV function’ s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu • Permit to tune and manage programmes. Programme Change (Depending on model) • Decide to change programme or not. Menu Display •... -
Page 24: Power On Default
Power On Default • Set the programme to display, etc. when turn on power. • When set to Off, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio menu. • When set to On, it can set by entering the subordinate menu. Input •... -
Page 25: Network
Network (Depending on model) MAC Address • Displays the MAC address (not customizable). Network Settings One-click network connection • Connects easily to a network. • This menu supports to connect to an available network. To connect to a network through Set Expert •... -
Page 26: Lg Connect
LG Connect (Depending on model) • Sets the 'LG Connect' function to On or Off. - You can connect TV via 'LG TV Plus' app in smart device. - Default setting is 'On' . IP Stream Control (Depending on model) Audio PTS Offset •... -
Page 27: Pro:centric
Pro:Centric (Depending on model) Mode • Sets whether or not enable Pro:Centric and the service method. • You can set to Off, Configuration Only, GEM or HTML. The default value is Off. WORF • When set to ‘Enable’ , Hour and Minute items are enabled and then the WORF function is enabled. •... -
Page 28: Receive Data
• P:C IP Setting - Server Address is set to IP Address. - Can select IPv4 or IPv6 type using 'IP Type' . (Depending on model) (IP Address) Set IPv4 or IPv6 address. (Port Number) Sets the actual port or number where the Pro:Centric server is running. - Server Address is set to Domain Name. -
Page 29: General
General Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU • Number of RCU value range 1~9. (When ‘Select RCU’ is set to ‘Enable’) •... - Page 30 » Type of Connector: D-Sub 9-Pin Male Male connector on box, viewed towards connector. Signal Signal requirements RX RS232 Standard RS232 specification TX RS232 Standard RS232 specification IR from TV Power ground 6, 8 Not connected +5 V DC 10 %, max 100 mV ripple 1.5 A +12 V DC 10 %, max 100 mV ripple One Channel Map...
- Page 31 Radio Name Display • Instead of “Audio Only”, the name of a radio programme is displayed on the screen when a radio broadcast is playing. • If the setting is “On”, the name of a radio programme is displayed for the radio programme. •...
- Page 32 InStant On (Depending on model) • Set to ‘Instant On Mute Mode’ or ‘Instant On Reboot mode’ to enable the Instant On feature. The Instant On feature allows the TV to turn On when AC power is applied, but with video and audio muted (Muted On). The TV retains its On status while appearing to be Off. Pressing the POWER button toggles Off/On the video and audio mutes, so that the TV appears to turn On instantly.
- Page 33 • You can configure the Sound Out to be set after power on. • You can select Off, TV Speaker, Optical, LG Sound Sync., HDMI ARC • If you set this option to Off, the TV maintains Sound Out after power on.
-
Page 34: External Speaker
External Speaker (Depending on model) Volume Control • Selects the volume control method of an external speaker. • You can select ‘Off’ , ‘Int Variable’ Fixed. ‘Ext Variable’ . (Depending on model) • Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 2 Watts. •... -
Page 35: Hcec Setup
• You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. • If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. • If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document) •... -
Page 36: Clock Setup
Clock Setup (Depending on model) Mood Display Setup (Depending on model) • You can setup Mood Display features. Clock Display (Depending on model) • You can select ‘Enable’ or ‘Disable’ . • After selecting ‘Enable’ , you can see the LED Clock TV. Dimming Standby (Depending on model) •... -
Page 37: Crestron
Crestron (Depending on model) • This function enables synchronization with applications provided by Crestron. • Server: This menu sets the server’ s IP address for the network connection with the server. (equipment provided by Crestron) • Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794. •... -
Page 38: Portal Settings
TV Information • You can check the TV information. Check Items • You can Inspect the TV status. Portal Settings (Depending on model) Portal Mode (Depending on model) • You can select 'Default Portal' (Use webOS default portal), 'Customizable Portal' (Use editable Portal), or 'None' (Do not use portal). Auto Start (Depending on model) •... -
Page 39: Website Shortcut
Website Shortcut (Depending on model) Shortcut • Sets Enable or Disable. When it is set to Enable, Website Shortcut app is displayed at launcher bar. Shortcut Name • You can set Website Shortcut app name (title). Shortcut URL • Sets URL to connect when excute Website Shortcut app. Shortcut Icon •... -
Page 40: Hotel Directory
Hotel Directory (Depending on model) • Set the information to display at Hotel Directory app. Facility or Service Name • Set the facility or service name. Details or Extension • Set the detailed information. Related Photo • You can select None, downloaded images or Download (Go to TV Manager). •... -
Page 41: Portal Manager
Portal Manager (Depending on model) This feature enables you to group together multiple monitor sets on a single network into the same group and copy portal setting data on a group basis. This feature has two modes, Master and Slave. Master •... - Page 42 Group Management • Creating a New Group Click Add New Group. Enter a group name. Click Add Device, select the devices you wish to add to the group, and add them. Click Done, and you will see that a new group has been created. •...
-
Page 43: Media Share
Media Share (Depending on model) Smart Share (Depending on model) • Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share app. Screen Share (Depending on model) •... -
Page 44: Softap
SoftAP (Depending on model) • SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point. • Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model) Use Default •... -
Page 45: Beacon
Beacon (Depending on model) • This option enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The iBeacon/Eddystone Type Beacon features are supported. iBeacon • Beacon UUID (hex): Set the UUID. Field1: 4byte hex value (8 digits) Field2: 2byte hex value (4 digits) Field3: 2byte hex value (4 digits) -
Page 46: Tv Manager
TV Manager * Images shown may differ from your TV. You can update files from USB to TV through the TV manager. Diagnostics (Depending on model) • Sets Enable or Disable. When it is set to Disable, user can’t control TV via RMS. The changed setting is applied after reboot. - Page 47 Ez Download • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Media files, Micom, Pro:Idiom M Key. (Depending on model) - Images, Icon, Pro:Idiom M Key file and Software Update files should be copied into the folder named LG_DTV on the USB. »...
- Page 48 • Press button to display storage usage information. • Press the “Clear Storage” button to delete the downloaded media files.
- Page 49 Import Clone File • Once the internal TV data and its programme map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card. The user should not turn TV off nor unplug the USB memory card while processing. The following reference images might be slightly different.
- Page 50 Export Clone File • “Export Clone File” creates “TLL” file in USB root folder. “TLL” file can be used to “Import Clone File”. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different.
-
Page 51: Usb Download Menu
USB Download Menu USB Cloning • An Installation can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Installation Menu settings, User A/V settings and the programme Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. - Page 52 Image Download (Depending on model) • The download sequence is Image Download Select Image(s) Download. • The target file is located in LG_DTV folders. • Press the "Clear Storage" button to delete the downloaded images. - Boot Logo Image (Depending on model) »...
- Page 53 Icon Download (Depending on model) • Images is located in LG_DTV folder. • If you updates the images, original images will be removed. • The download sequence is Icon Downalod Select Images Download. • Icon Image can download only one file. •...
- Page 54 Video Download (Depending on model) • Media files is located in LG_DTV folder. • The download sequence is Video Download Select media file Download. • Media files can only download one file each. • If you updates the video file, original file will be removed. •...
- Page 55 Software Update ► Update TV Software • This feature updates TV software through the EPK file in USB. • The target file is located in LG_DTV folder. • The download sequence is Software Update Update TV Software Select file(EPK) Update. ►...
-
Page 56: Ir Codes
IR Codes • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button (Q. Settings) Remote control Button (BACK) Remote control Button Remote control Button Remote control Button... -
Page 57: External Control Device Setup
External control device Setup Phone jack Type (TV) (Depending on model) (PC) RS-232C Setup • You need to purchase the phone-jack to RS-232C cable required for RS-232C IN the connection between the PC and the TV, which is specified in the (CONTROL &... -
Page 58: Rs-232C Configurations
RS-232C Configurations IR OUT Using Guide Suitable / Not Recommend remote-controller data format 7-Wire Configurations (Standard RS-232C cable) Item Formats Suitable data format NEC, RC5, Toshiba Continuous data format Not recommend data format (short burst/gap signal) IR Receiver specifications Carrier frequency 37.9 KHz Peak Wavelength 940 nm... -
Page 59: Command Reference List
IR output signals will be suppressed automatically by IR receiver. (Depending on model) • In this case, LG does not guarantee IR working function. • To make sure of this matter, here are two methods as below. Data - Use the remote-controller with suitable data... -
Page 60: Transmission / Receiving Protocol
Transmission / Receiving Protocol 1 Power (Command: k a) ► To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Off [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 01 : On [Command1] : First command to control the TV. (j, k, m or x) [Command2] : Second command to control the TV. - Page 61 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data Min : 00 to Max : 64...
- Page 62 10 Sharpness (Command: k k) 14 Colour Temperature (Command: x u) ► To adjust the screen sharpness. ► To adjust Colour Temperature. You can also adjust Colour Temperature in You can also adjust sharpness in the picture settings. the picture settings. Transmission Transmission [x][u][ ][Set ID][ ][Data][Cr]...
- Page 63 16 Auto Configuration (Command: j u) (Only RGB support model) 18 Tune Command (Command: m a) ► To adjust picture position and minimize image shaking automatically. It ► Select channel to following physical number. works only in RGB (PC) mode. Transmission Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr]...
- Page 64 21 Control Backlight (Command: m g) * Real data mapping ► To control the backlight. 00 : Step 0 Transmission Step 10 (Set ID 10) [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) [g][ ][Set ID][ ][OK/NG][Data][x]...