Connection - Dell Vostro 3000 Setup And Specifications Manual

Table 32. Storage
Options
SATA Operation
SATA Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Enable MediaCard

Connection

This section provides connection details and settings.
Table 33. Connection
Options
Wireless Device Enable
Enable UEFI Network Stack
30 System setup
Description
This section allows the user to select the operating mode
of the integrated SATA hard drive controller. The following
options are available here:
● Disabled - SATA controllers are disabled.
● AHCI - SATA is configured in AHCI mode.
● RAID On - SATA is setup to support RAID (Intel Rapid
Storage Technology).
This section allows the user to enable or disable the onboard
drives on the computer. The following options are available
here:
● SATA-0
● M.2 PCIe SSD-0
This section contains a toggle switch that allows the user to
enable or disable the S.M.A.R.T(Self-Monitoring, Analysis, and
Reporting Technology) option on the system.
This section provides information about the connected and
active drives on the computer.The following options are
available here:
● SATA-0
○ Type
○ Device
● M.2 PCIe SSD-0
○ Type
○ Device
This section allows the user to switch all media cards On/
Off, or enable/disable the media card in read-state only. The
options seen are as below
● Secure Digital(SD) Card
● Secure Digital(SD) Card Read-Only Mode
Description
This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:
● WLAN
● Bluetooth
This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.