Honda GL1800 2004 Owner's Manual page 152

Storing Pre-load Into the Memory
You may store two selected adjustments in ''MEMO 1'' or ''MEMO 2''.
1. Adjust the pre-load to the desired position.
2. Push and hold the MEMO 1 or MEMO 2 button until ''STORE MEMO 1'' or
''STORE MEMO 2'' blinks in the multi-display. When the blinking stops, the
current position is stored in memory.
Storing
Selecting the Memorized Position
Push the MEMO (1 or 2) button to select the memorized position. ''CALL
MEMO 1'' or ''CALL MEMO 2'' will blink. When the position is selected,
''MEMO 1'' or ''MEMO 2'' will turn on.
Calling
Pushing the rear spring pre-load switch or the MEMO (1 or 2) button while
selecting a memorized position will cancel the calling procedure.
Stored
Called
Servicing Your Honda
Suspension
145