Start Button; Combination Switch; Overview Of Indicator Lamps - KTM 450 SX-F 2021 Owner's Manual

6 CONTROLS
6.5
6.6
6.7
16

Start button

S01195-10

Combination switch

H02887-01

Overview of indicator lamps

F01577-10
1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
is pressed – In this position, the starter
• The start button
motor is actuated.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when
1
LED 1 lights up.
STANDARD with TC – STANDARD mapping with trac-
1TC
tion control is activated when LED 1 and TC light up.
ADVANCED – ADVANCED mapping is activated, when
2
LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with trac-
2TC
tion control is activated when LED 2 and TC light up.
The engine characteristic can be changed using button MAP on the
combination switch.
The launch control and the traction control can also be activated
using the combination switch.
Possible states
Malfunction indicator lamp lights up/flashes orange
– The OBD has detected a malfunction in the vehicle
electronics.
Malfunction indicator lamp flashes orange rapidly
– Launch control is activated.
(XC‑F US)
Fuel level warning lamp lights up orange – The fuel
level has reached the reserve mark.