Step 1.
Disconnect the HDD cable from the system board. Remove two screws and then remove the HDD
module.
Figure 42. Remove the HDD module
Screw specifications
M2 x L5
Step 2.
Remove the HDD cable.
Figure 43. Remove the HDD cable
Step 3.
Remove four screws and then remove the HDD and HDD bracket.
Figure 44. Remove the HDD and HDD bracket
Screw specifications
M3 x L3
Number of screws
2
Number of screws
4
.
Chapter 4
Removing a FRU or CRU
55