Table of Contents
Advertisement
For more details on using memory cards, see manuals accompanying the
cards.
Inserting memory media
The following instructions apply to all types of supported media devices. To
insert memory media, follow the steps as detailed below:
1.
2.
3.
User's Manual
Do not twist or bend cards.
Do not expose cards to liquids or store in humid areas or lay media
close to containers of liquid.
Do not touch the metal part of a card or expose it to liquids or let it get
dirty.
After using card, return it to its case.
The card is designed so that it can be inserted only one way. Do not
try to force the card into the slot.
Do not leave a card partially inserted in the slot. Press the card until
you hear it click into place.
Memory cards have a limited lifespan, so it is important to backup
important data.
Do not write to a card if the battery power is low. Low power could
affect writing accuracy.
Do not remove a card while read/write is in progress.
Turn the memory media so that the contacts (metal areas) face down.
Insert the memory media into the memory media slot on the tablet.
Press the memory media gently until it clicks into place.
1. Memory media slot
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn the tablet off or switch to Sleep Mode or Hibernation Mode
while files are being copied - doing so may cause data to be lost.
Figure 4-2 Inserting memory media
2
2. Memory media
1
4-7
Advertisement
Table of Contents
