Table of Contents
Advertisement
DRIVING INSTRUCTIONS
STARTING THE VEHICLE
1.
Study and understand controls.
2.
Make sure everyone is seated and holding onto seat handles or
handrails.
3.
Read safety and information decals located on the vehicle.
4.
Make sure wheels are turned in desired direction.
5.
Place Forward/Reverse switch in neutral, then turn key to the on
switch. Select direction by placing Forward/Reverse handle or
switch in desired position (F = forward or R = reverse). A buzzer
will sound as a warning when the Forward/Reverse handle or
switch is in the REVERSE position.
6.
Slowly press accelerator pedal. The park brake will release
automatically, and the vehicle will start to move. As the
accelerator pedal is pressed, speed will increase until full speed is
reached. See following WARNING.
WARNING
NOTE: If the Forward/Reverse switch is shifted into the NEUTRAL position,
power will be cut off and the engine will stop running.
See General Warnings.
WARNING
•
Turn the key switch to the OFF position, remove the key, and leave the
Forward/Reverse switch in the NEUTRAL position during storage.
•
For lead acid batteries: Do not attempt to charge frozen batteries or
batteries with bulged cases. Discard the battery. Frozen batteries can
explode.
•
For lithum batteries: Never charge batteries under 36 F. This will cause
permanent damage to the battery.
CAUTION
•
Batteries in a low state of charge will freeze at low temperatures
(lead acid batteries only).
To avoid exposing electrical components to moisture and subsequent damages,
do not use any type of pressure washing or steam cleaning equipment to wash
the cart.
PREPARING THE ELECTRIC VEHICLE FOR EXTENDED STORAGE
To keep batteries fully charged during storage:
•
Plug the battery charger into the car. Leave battery chargers plugged in
during storage. The charger will automatically activate when necessary.
(see page 20, lithium battery warranty-battery tips)
Page 11
Advertisement
Table of Contents
