Table of Contents
Advertisement
Problem
Shuts Off Before Clothes
are Dry
Water Valve Not
Dispensing (On Some
Models)
(Water valve is activated
intermittently during
the steaming portion of
cycle)
Water Leaking from
Dryer (On Some Models)
(Too much water being
dispensedduring steam
cycles)
Check Vent Message
on Display During Cycle
Operation
Cannot Connect to
Home WIFI System (On
Some Models)
For Service Technician Use Only
Possible Cause
Dryness or Dry Level setting for auto cycles.
Lint screen full or Heater vent clogged.
Moisture Sensor problem.
Steam cycle or steam option not selected.
No water to valve.
No water from valve.
Residue buildup on water nozzle opening.
Poor airflow.
HMI Wi-Fi disabled.
HMI not connected to Wi-Fi router.
DIAGNOSTICS and TROUBLESHOOTING (Cont.)
Increase Dryness level setting for one or more auto
cycles.
Clean if necessary.
See
Test #5: Moisture
Refer to "Quick Reference Guide".
Verify water supply is turned on.
See
Test #9: Water
Unscrew nozzle and clean if necessary.
Check lint screen. Clean if necessary.
Check ventilation system. Clean if necessary.
Select Remote Enable key. Use App to setup Wi-Fi.
See Troubleshooting Guide for Connected Appliance.
Whirlpool® and Maytag® Dryer
Checks and Tests
Sensor.
Valve.
2-9
n
Advertisement
Table of Contents
Troubleshooting
