Sony ILCE-1 Help Manual page 473

Size of Sending Image:
Selects the file size for images to be transferred to the smartphone. The original-sized JPEG/HEIF file or a 2M-
equivalent JPEG/HEIF file can be transferred. ([Original]/[2M])
RAW+J/H Send Target:
Selects the file type for images to be transferred to a smartphone when the images are shot with [
[Image Quality Settings] set to [RAW & JPEG] or [RAW & HEIF]. ([JPEG & HEIF]/[RAW]/[RAW+J & RAW+H])
Sending Target:
Sets whether to transfer the low-bit-rate proxy movie or the high-bit-rate original movie when transferring a movie to a
smartphone. ([Proxy Only]/[Original Only]/[Proxy & Original])
Hint
For connection methods other than using the QR code, refer to "Related Topic" at the bottom of this page.
Note
Depending on the smartphone, the transferred movie may not be played back correctly. For example, the movie may not play
smoothly, or there may be no sound.
Depending on the format of the still image, movie, slow-motion movie, or quick-motion movie, it may not be possible to play it
back on a smartphone.
This product shares connection information for transferring images with devices that have permission to connect. If you want to
change the devices that are permitted to connect to the product, reset the connection information by following these steps. MENU
→ (Network) → [Wi-Fi] → [SSID/PW Reset]. After resetting the connection information, you must register the smartphone
again.
When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set [Airplane Mode] to [Off].
Related Topic
Connecting the camera and a smartphone using the QR Code
Connecting the camera and a smartphone using the SSID and password
One-touch connection with NFC
Airplane Mode
5-025-537-14(1) Copyright 2021 Sony Corporation
473
File Format] under