Aspect Controls - Panasonic TH-65PV500B Operating Instructions Manual

Aspect Controls

The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including
widescreen cinema format pictures.
Press the ASPECT button repeatedly to move through the aspect options.
Press the ASPECT button. Whilst the on screen selector keys are displayed, use the
Red or Green buttons to move in either direction through the aspect options.
Signal name
Panasonic
Auto
○
PAL I
○
PAL 525/60
○
DVB
○
M.NTSC
NTSC
○
(AV input only)
○
525(480)/60i
○
525(480)/60p
○
625(576)/50i
○
625(576)/50p
-
750(720)/50p
-
750(720)/60p
-
1125(1080)/50i
-
1125(1080)/60i
-
PC input
-
MPEG4 view ∗
○
Photo view
∗ When Frame size in Viewing setup is Normal, you can select only 16:9 and 4:3.
Panasonic Auto
Panasonic Auto determines the best aspect ra tio to use to fi ll your screen. It
does this using a four step process to determine if the picture being viewed is
a widescreen picture.
If Panasonic Auto detects a widescreen signal it switches into the ap pro pri ate
widescreen mode. If Panasonic Auto does not detect a widescreen signal then
this advanced TV set enhances the picture for optimum viewing pleasure.
The text shown on the screen indicates how Panasonic Auto de ter mined
which ratio to use:
Panasonic Auto switches to the appropriate widescreen ratio.
If black stripes above and below the picture are detected, aspect ratio changes
automatically.
Panasonic Auto chooses the best ratio and expands the picture to fi ll the
screen. This process can take several minutes, depending on the darkness
of the picture.
You may prefer to manually select one of the other aspect options available
to view the picture.
Notes:
• If, in Panasonic Auto mode, you experience problems with the screen display
size when playing back widescreen format recordings from your VCR then
it is possible that the tracking control of your VCR requires adjustment (your
VCR instruction book will contain adjustment details).
• The widescreen aspect ratios of different fi lms and programmes can vary.
If these are wider than a standard 16:9 aspect picture then a black band may
be visible at the top and bottom of the screen.
• "WIDE" will appear in the top left corner of the screen and picture aspect
changes accordingly in any aspect modes, if a widescreen identifi cation signal
(WSS) is detected or a control signal is found through a Scart terminal.
• Automatic aspect ratio adjustment by WSS signal is not available for
progressive and high defi nition component signals input.
OR
Aspect modes
16:9 14:9 Just 4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2 AV3 AV4 Component TV AV1 AV2 AV3 AV4
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ ○ - ○ ○
○ - - - -
○ - - - -
○ - - - -
○ - - - -
○ - - ○ -
○ ○ ○ ○ ○
○ ○ ○ ○ -
WSS
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ - - -
○ ○ - - -
○ ○ - - -
○ ○ - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
○ - - - -
- - - - -
ASPECT
Red Green
Aspect Control Signal
Control signal through
SCART terminal (pin 8)
- ○ ○ ○
- ○ ○ ○
- ○ ○ ○
- ○ ○ ○
- ○ ○ ○
- - - - -
- - - - -
- - ○ - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
WIDE
"WIDE" ap pears in the top left
of the screen, Panasonic Auto
switch es to the ap pro pri ate 16:9
or 14:9 widescreen ratio.
Panasonic Auto
"Panasonic Auto" appears in the
top left of the screen. The best
ratio is chosen and the picture
expanded to fi ll the screen.
Panasonic Auto
Press the ASPECT button, then
use the Red or Green buttons to
move in either direction through the
aspect options.
OK
- ○
- ○
- ○
- ○
- ○
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
35