Initial Installation - Honeywell Graceshire 51859 User Manual

PREPARATION
Before beginning the assembly of this product, ensure all parts are present. Compare all parts with the package contents list
and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 2 hours
Tools required (not included): Phillips and Flat-head Screwdrivers, Safety Glasses, Step Ladder, Wire Cutter, and Wire Stripper.
1. Turn off power to the fan at the breaker box and the wall switch (Figure 1.1). DANGER: Failure to disconnect the power supply
prior to installation may result in serious injury or death.
2. This fan is intended for Flushmount Installation. Standard Mounting, Angle Mounting, and Closemount installations are not
available (Figure 1.2).
3. When selecting a location for installation, ensure the blades will be at least 30 inches from any wall or obstruction and at
least 7 feet above the floor (Figure 1.3).
Figure 1.1

INITIAL INSTALLATION

1. Loosen all four mounting bracket screws, then completely remove two mounting bracket screws from opposite sides of the
mounting bracket (Figure 2.1).
2. Install the mounting bracket to the outlet box (sold separately) using the screws and washers provided with the outlet box.
WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to the outlet box marked "acceptable for fan
support" (Figure 2.2).
3. Raise the fan and place top of the motor assembly on the hook on the mounting bracket, temporarily leaving hands free for
the wiring process (Figure 2.3).
Mounting Bracket Screw
Mounting Bracket
Figure 2.1
Standard Mounting Angle Mounting
Flushmount Closemount
Figure 1.2
Outlet Box
Mounting Bracket
Figure 2.2
EN I 5
7 feet
minimum
Figure 1.3
Mounting Bracket
Figure 2.3
30 in.
minimum
Hook