1
2
1. Transmission oil filler cap
2. O-ring
4. Remove the transmission oil drain bolt and its
gasket to drain the oil from the transmission
case.
1. Transmission oil drain bolt
2. Gasket
5. Install the transmission oil drain bolt and its
new gasket, and then tighten the bolt to the
specified torque.
Tightening torque:
Transmission oil drain bolt:
30 N·m (3.0 kgf·m, 22 lb·ft)
6. Refill with the specified amount of the recom-
mended oil. NOTICE: Make sure that no
foreign material enters the transmission
case.
[ECB03380]
8-15
2
1
8